Solar Calculators for San Diego, California

Q: What should I verify before signing a solar contract in San Diego?

Confirm that the quote names your actual utility, uses a recent electricity rate, includes measured shade and roof-condition findings, and explains who handles permits and interconnection. Ask the installer to separate guaranteed equipment and workmanship terms from estimated production, incentives, and savings.

Free tools with illustrative San Diego planning inputs. Replace energy rates and installation costs with your bill and written quote.

Quick answer

Start with your exact utility account and roof design. The 5.8 sun hours and 30.0 cents/kWh below are planning assumptions, not verified current rates for San Diego. Confirm SDG&E eligibility and export settlement.

Notes updated 2026-07-26

Best for: San Diego homeowners comparing a proposal or estimating savings before calling installers.
Inputs needed: 12-month kWh usage, roof shade, SDG&E, quoted $/W
Formula used: Local production = system kW × local peak sun hours × 365, then adjusted for losses.
Method references: NREL PVWatts, SDG&E, California incentive rules

Peak sun hours

5.8

hrs/day planning assumption

Illustrative energy rate

30.0¢

per kWh (SDG&E)

Typical install cost

$3.1/W

planning assumption, not a market median

Net metering policy: Net billing (exports < retail)

What San Diego homeowners should check

San Diego has strong annual sunshine, although coastal marine layers can soften morning production. Salt exposure near the coast makes corrosion-resistant racking and careful equipment placement useful questions for an installer.

Most local homes are served by SDG&E under California net billing. High evening rates can make west-facing panels, load shifting, or battery storage more valuable than maximizing noon exports.

At the state level, California currently uses net billing (nem 3.0). A typical interconnection takes 4–10 weeks (sgip approval can add time), but utility review and local permitting can extend that range. Check current rules before relying on a proposal's export-credit or installation-date assumptions.

What should I verify before signing a solar contract in San Diego?

Confirm that the quote names your actual utility, uses a recent electricity rate, includes measured shade and roof-condition findings, and explains who handles permits and interconnection. Ask the installer to separate guaranteed equipment and workmanship terms from estimated production, incentives, and savings.

Illustrative 8 kW system in San Diego

Annual production

14,551 kWh

Retail-value ceiling

$4,365

System cost (est.)

$24,800

Energy-only cost/value ratio

~6 yrs

Illustrative 5.8 peak sun hours, 14.08% production losses, 30.0 cents/kWh and $3.1/W. The retail-value ceiling assumes every kWh earns retail value; lower export credits reduce it. The cost/value ratio is not a full payback model and excludes repairs, financing and rate changes. No new Section 25D homeowner credit in 2026.